Jeez Louise, what we are going through to save some Bradbury wallpaper border that we don’t even like!
We have some major plaster work going down in our dining room at the moment. Unfortunately, the ceiling wasn’t worth saving, so we laminated and lost the border up there. We even contacted Bradbury to see if there was a way to steam it off and reuse it, but they didn’t recommend that.
In any case, we were determined to keep the wall border alive and well. It took the better part of a day to prep the room for plastering and painting. Between covering the paper, the mantel and all of the wood moldings, it doesn’t look like there’s a hell of a lot of wall space left to work on.
After all is said and done, the border will lose 1-2 inches because we’ll have to put molding on the top and bottom since we don’t want to go near it with the plaster.
By the way, of course what we thought would be a simple “chasing out a few cracks and plastering” turned into a nightmare. It will most likely need a skim coat now, not to be done by us as we are not master plasterers. We found out that it’s not so easy to find hardcore plaster supplies in this neck of the woods (Beacon). Must be something to do with the renovation vs. restoration thing. Crappy new sheetrock for everyone!
PS: How much do I love my new scaffolding?
1 Comment
[…] dining room plaster repair proved a bit problematic as we needed to work around our wallpaper border. We actually laminated the ceiling and repaired cracks in the walls. We’ll need to use a thin […]